Oil Lubricated Pumps Products Supplier

At Lo-Lift Pumps is a supplier and manufacturer offering a range of pump products and support services relating to industrial lubrication. For more information, call us: (337) 734-3502 or visit us.

Achieving Improved Functionality and Performance with Propeller Pumps

Discharge and manipulation of fluids is a pivotal modality across various industrial sectors. A contrivance that helps in this process holds becomes an integral unit that impacts an application’s output. Propeller Pumps are one such equipment that is used in many commercial and industrial operations. Its design resonates that of a ship’s propeller mixed with an axial flow module. It enables vertical discharge of water from lakes, tanks, rivers, and oceans, along with stormwater removal and flood control. These are suitable to achieve large flow rates at specific speeds with reasonable power input.

A Closer Look 

The propellers in this siphon are fixed-pitch blades that require adjustments only when completely dismantled. These inter-changeable vanes reduce profile convexity. The cut-off point can also be adjusted during operation using a mechanical or hydraulic gear without any need for new components. 

Some applications require the use of single-stage pumps, which are economical when compared to multistage variables. These units also have a rotating assembly that is employed as land reclamation components in irrigation, drainage, heating systems, power stations, and elbow casing siphons in chemical and food processing industries.

Its propeller blades are powered by a motor that is directly sealed to a chamber or enclosed within a drive shaft. Their pitch volume is adjusted by the blades’ placement, so it is useful for high flow with a low-pressure type of application. In either case, the industrial setting of its application imposes a significant impact on the output.

Trouble-Shooting Techniques 

In simple terms, oil-lubricated pumps perform better than others. These can also last for several years devoid of any major failures. Over its lifetime, a siphon creates a great amount of friction between its mechanical parts, so it is essential to avoid this naturally occurring resistance with optimal lubrication.

One primary objective is to opt for a suitable lube. Using different grease for various applications can cause performance issues over the long run. The synthetic oil is not suitable for mineral application-based units, while high-speed components require low-viscosity lubrication. So, it is a must to consider these factors prior to purchase.

Next is the cleanliness level of a product. This thickness can range from three to ten microns based on its design and function. Thus, anything bigger than that can cause micro-level damages, which will get more severe with continued operation. Such cases are factual in ball bearing housing and race surfaces.

Oil’s moisture is another crucial consideration, as it reduces the life of bearings. Moisture can from various sources, especially ambient conditions around equipment. This is the reason to eliminate storage failure modes to decrease moisture levels in lubrication. Ensuring such qualities inevitably leads to a durable and high performing propeller pump.

Mixed Flow Pumps Distributor

At Lo-Lift Pumps, we provide mixed flow pumps products ideal for applications with high flow, low-pressure requirements. For more information, call us: (337) 734-3502 or visit us.